Publications Scientifiques

A negative association of CTLA-4 genetic variant (rs11571317) with breast cancer risk in Moroccan population

N. Ighid, et al.

Date de publication : 17-01-2020

Gene Reports

Lien : http://www.sciencedirect.com/science/article/pii/S2452014422000218?via%3Dihub

Mineral prospectivity mapping: a potential technique for sustainable mineral exploration and mining activities – a case study using the copper deposits of the Tagmout basin, Morocco

F. Z. Echogdali, et al

Date de publication : 22-12-2021

Geocarto International

Lien : http://www.tandfonline.com/doi/abs/10.1080/10106049.2021.2017006

Room for improvement – Remarkable impurities found on randomly chosen ceramic implants

Dr Dirk U. Duddeck

Date de publication : 20-12-2021

Ceramic implants international No. 2, 2021 / International magazine of ceramic implant technology

Lien : http://dental-tribune.com/e-paper/ce-magazines/ceramic-implants-international/ceramic-implants-international-no-2-2021-2/

An Economic Preventive Maintenance Policy for a solar Photovoltaic System

L. Mifdal et al.,

Date de publication : 10-12-2021

13th International Exergy, Energy and Environment Symposium (IEEES-13)

The behaviour of aluminium alloy AW5005 sheet subjected to impactand perforation process experimental and numerical approach

A. Bendarma, et al.

Date de publication : 01-11-2021

3rd International Conference on Central European Critical Infrastructure Protection (ICCECIP’2021)

Lien : http://bgk.uni-obuda.hu/iccecip/sites/default/files/attachment/iccecip_2021_abstract_book.pdf

Multi-scale physico-chemical characterization of CEB/ANS bio-composites

H. Akhzouz et al.,

Date de publication : 01-11-2021

International Network of Biomaterials and engineering science (INBES’2021)

A Closed-loop supply chain with remanufacturing of EOL products and environmental considerations

Z. Chekoubi et al.

Date de publication : 01-11-2021

6th Edition of the International Conference on Project & Logistics (PROLOG’2021)

Lien : http://hal.univ-lorraine.fr/view/index/docid/3519597

Experimental Study of Thermal Energy Storage with a Phase Change Material

L. El-Kaddadi et al.,

Date de publication : 10-08-2021

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics

Thermodynamic modeling of the Ce-Te system

H. Bouchtaa et al.,

Date de publication : 10-08-2021

The 4th International conference of computer science and renewable Energies (ICCSRE’2021)

Numerical study of a 2D cylinder by the URANS method in the supercritical regime

M. Maine et al.,

Date de publication : 01-06-2021

The 4th edition of the National PhD Students Days 2021 (NPSD’21)

Experimental Assessment of Glass/Epoxy High Velocity Impact Performance at Different Temperatures

M. Klosak et al.,

Date de publication : 01-03-2021

5th Brazilian Conference on Composite Materials – BCCM 5 Sao Carlos School of Engineering

Lien : http://soac.eesc.usp.br/index.php/bccm/5bccm/paper/viewFile/3038/1949

Smart Ports Design Features Analysis: A Systematic Literature Review

S. Bessid et al.,

Date de publication : 01-12-2020

13th International Conference on Modeling, Optimization and Simulation (MOSIM’2020)

Lien : http://hal.archives-ouvertes.fr/hal-03177580/

Optimisation conjointe de la planification de la production d’énergie, de la maintenance et des pièces de rechange d’un parc éolien

A. Faker et al.,

Date de publication : 01-12-2020

13th International Conference on Modeling, Optimization and Simulation (MOSIM’2020)

Lien : http://hal.archives-ouvertes.fr/hal-03177560/

Stratégie de maintenance optimale d’une station de panneaux solaires sur un horizon de temps fini

S. El Kouiri et al.,

Date de publication : 01-12-2020

13th International Conference on Modeling, Optimization and Simulation (MOSIM’2020)

Lien : http://hal.archives-ouvertes.fr/hal-03192794/

Caractérisation mécanique du bio-composite BTC/Noix d’argane : Perforation dynamique

H. Akhzouz et al.,

Date de publication : 10-06-2020

Sciences et Technologies Mécaniques et des matériaux au cœur du Développement Durable (JET’2020)

The Integrated Production-Inventory-Routing Problem with remanufacturing under carbon cap-and-trade

Z. Chekoubi et al.

Date de publication : 18-05-2020

6th International Conference on Optimization and Applications (ICOA’2020)

Lien : http://ieeexplore.ieee.org/abstract/document/9094487

An Optimal Preventive Maintenance Policy for a Solar Photovoltaic System in Order to Promote Sustainability & Profitability

S. El Kouiri et al.,

Date de publication : 01-04-2020

The 10th International Conference in Industrial Engineering and Operations Management (IOEM’2020)

Lien : http://www.ieomsociety.org/ieom2020/papers/530.pdf

Optimal Integrated Maintenance, Production and Spare Parts Strategy for Wind Turbines System

A. Faker et al.,

Date de publication : 01-04-2020

The 10th International Conference in Industrial Engineering and Operations Management (IOEM’2020)

Lien : http://www.ieomsociety.org/ieom2020/papers/112.pdf

Dynamic characterization of bio-composite CEB/Nut-shells of Argan

H. Akhzouz et al.,

Date de publication : 10-03-2020

Conférence internationale sur le séchage et le développement durable (CIS2D’2020)

Homogenization of bio-composite CEB/Nut-shells of Argan

H. Akhzouz et al.,

Date de publication : 10-03-2020

Conférence internationale sur le séchage et le développement durable (CIS2D’2020)

Genetic heterogeneity in Moroccan primary congenital patients

S. El Akil et al.,

Date de publication : 01-01-2020

1st International Congress of the Moroccan Society of Genomics and Human Genetics (SM2GH) & 3rd School of Immunogenetics (SIG)

Lien : http://www.researchgate.net/profile/Ahmed-Belmouden-2/publication/269337289_Genetic_heterogeneity_in_Moroccan_primary_congenital_glaucoma_patients/links/55074f720cf2d7a281242bcb/Genetic-heterogeneity-in-Moroccan-primary-congenital-glaucoma-patients.pdf

Evolution of effective distance by stress triaxiality on mixed mode fracture I+II –Volumetric Approach

M. Fakir et al.,

Date de publication : 01-01-2020

3rd International Conference on Materials and Environmental Science (ICMES2019)

A Model Predictive Approach for Ventilation System Control in Energy Efficient Buildings

A. Berouine et al.,

Date de publication : 12-12-2019

4th Edition of World conference on Complex Systems (WCCS’2019)

Lien : http://ieeexplore.ieee.org/abstract/document/8930739

Optimisation des coûts de production en usinage. Couplage entre un modèle analytique de coupe et une stratégie de maintenance

E.M. Kibbou et al.,

Date de publication : 01-12-2019

Conférence Internationale sur la Mécanique des Matériaux et des Structures (MSM‘2019)

Research for the gene harboring mutation within Primary Congenital. Glaucoma locus-3B (GLC3B). Case study of the KAZN gene

S. El Akil et al.,

Date de publication : 02-11-2019

The 2nd International Scientific Day of Taroudant

Lien : http://association-mare.org/wp-content/uploads/2019/10/PROGRAMME-ISDT-2-V-FINAL-16.pdf

CYP2D6 polymorphisms and breast cancer risk in Moroccan population

E. Elouilamine et al.,

Date de publication : 02-11-2019

The 2nd International Scientific Day of Taroudant

Lien : http://association-mare.org/wp-content/uploads/2019/10/PROGRAMME-ISDT-2-V-FINAL-16.pdf

Interleukin gene polymorphisms IL6-174 (rs1800795) and IL10-819 (rs1800871) and breast cancer susceptibility in Moroccan women

F.Z. Aznag et al.,

Date de publication : 02-11-2019

The 2nd International Scientific Day of Taroudant

Lien : http://association-mare.org/wp-content/uploads/2019/10/PROGRAMME-ISDT-2-V-FINAL-16.pdf

Genetic association of STAT-3 polymorphisms (rs744166 and rs2293152) and breast cancer in the Moroccan population

N. Ighid et al.,

Date de publication : 02-11-2019

The 2nd International Scientific Day of Taroudant

Lien : http://association-mare.org/wp-content/uploads/2019/10/PROGRAMME-ISDT-2-V-FINAL-16.pdf

A study of dynamic fracture of steel specimens for protective structures applications – experimental and numerical analysis

M. Grazka et al.,

Date de publication : 01-11-2019

Light Weight Armour for Defence & Security (LWAG)

A Fuzzy Logic-Based Approach for HVAC Systems Control

A. Berouine et al.,

Date de publication : 02-09-2019

2019 6th International Conference on Control, Decision and Information Technologies (CoDIT)

Lien : http://ieeexplore.ieee.org/abstract/document/8820356

Integrated maintenance/production planning for a multiple product with energy consideration

Z. Hajej et al.,

Date de publication : 01-07-2019

The 13th edition of CIGI QUALITA conference

Lien : http://hal.archives-ouvertes.fr/hal-03251055/

Integrated Logistics, Production and Maintenance Problem for a Multiple-Product System

Z. Hajej et al.,

Date de publication : 01-07-2019

5th Edition of the International Conference on Project & Logistics (PROLOG’2019)

Lien : http://hal.archives-ouvertes.fr/hal-03251054/

Logistics Distribution Routing Optimization of terroir products for solidarity shelves: A case study of a group of cooperatives and tourist establishments in rural areas of Souss Massa region

Z. Chekoubi et al.

Date de publication : 01-07-2019

5th Edition of the International Conference on Project & Logistics (PROLOG’2019)

Lien : http://hal.archives-ouvertes.fr/hal-02170978/

The Integrated Production-Inventory-Routing Problem of EOL products with simultaneous delivery and pickup

Z. Chekoubi et al.

Date de publication : 01-07-2019

7th IEEE International Conference on Advanced Logistics and Transport (ICALT’2019)

Lien : http://hal.archives-ouvertes.fr/hal-02465654/document

Intrusion detection system based on machine learning algorithms to protect the use of water on agricultural fields

Y. El Mourabit et al.,

Date de publication : 01-05-2019

1st Climate Smart and Disaster Resilient ASEAN Internationale Conference

Secure transmission of medical data via the virtual bio-instrument

B. Nassiri et al.,

Date de publication : 01-05-2019

The 5th International Conference on Business Intelligence

Numerical study of brass properties through perforation tests at different temperatures

M. Klosak et al.,

Date de publication : 01-05-2019

13th Workshop Dynamic Behaviour of Materials and its Applications in Industrial Processes DYNAMAT

Influence des vibrations non-linéaires sur l’état des surfaces en usinage a sec: Modèle analytique

E.M. Kibbou et al.,

Date de publication : 01-05-2019

14ème édition du congrès de mécanique (CMM’2019)

Amélioration des propriétés d’un matériau nano composite pour une détection plus performante

S. El Garouge et al.,

Date de publication : 01-05-2019

14ème édition du congrès de mécanique (CMM’2019)

Homogénéisation d’un bio composite BTC/Noix d’arganier

H. Akhzouz et al.,

Date de publication : 01-05-2019

14ème édition du congrès de mécanique (CMM’2019)

Etude du comportement mécanique des bio composites BTC/CNA

H. Akhzouz et al.,

Date de publication : 01-04-2019

5ième Journée Internationale Matériaux et Environnement (JIM

A comparison between the periodic and the random models in studying the thermal behavior of composites reinforced with unidirectional fibers

S. El Marzouki et al.,

Date de publication : 01-03-2019

International Conference on Plasma and Energy Materials (ICPEM’2019)

Etude d’homogénéisation du bio-composite BTC/CNA

H. Akhzouz et al.,

Date de publication : 01-03-2019

International Conference on Plasma and Energy Materials (ICPEM’2019)

Perforation Tests of Aluminum Alloy Specimens for a Wide Range of Temperatures Using High-Performance Thermal Chamber – Experimental and Numerical Analysis

A. Bendarma et al.,

Date de publication : 01-01-2019

2018 4th International Conference on Mechanical and Aeronautical Engineering (ICMAE’2018)

Lien : http://iopscience.iop.org/article/10.1088/1757-899X/491/1/012027/meta

Etude du comportement mécanique des blocs en terre comprimée chargés de granulats de la noix d’arganier : caractérisation expérimentale et modélisation

H. Akhzouz et al.,

Date de publication : 01-12-2018

Premier Congrès International Géosciences, Ressources Naturelles et Environnement (CIGREN)

GLC3B and GLC3C Loci Involvement In Moroccan Congenital Glaucoma

S. El Akil et al.,

Date de publication : 06-10-2018

The 1st International Scientific Day of Taroudant

Pharmacogenetics of Cytochrome P450 (CYP2C9 and CYP2C19) and the susceptibility of breast cancer in the Moroccan population

E. Elouilamine et al.,

Date de publication : 06-10-2018

The 1st International Scientific Day of Taroudant

Genetic polymorphisms of the CTLA-4 gene (rs231775), (rs4553808), (rs11571317) and (rs5742909) and their associations with breast cancer in the Moroccan population

N. Ighid et al.,

Date de publication : 06-10-2018

The 1st International Scientific Day of Taroudant

Dynamic perforation and compression tests of PMMA for a wide range of temperatures – experimental and preliminary numerical analysis

M. Klosak et al.,

Date de publication : 01-10-2018

12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT)

Lien : http://www.dymat-proceedings.org/articles/epjconf/abs/2018/18/epjconf_dymat2018_02055/epjconf_dymat2018_02055.html

Experimental analysis of aluminium-rubber sandwich structure strength during perforation tests within a wide range of temperatures

M. Klosak et al.,

Date de publication : 01-09-2018

5th International Conference on Protective Structures (ICPS5)

Experimental analysis of perforation resistance of construction-built materials taking into account a wide range of temperatures

M. Klosak et al.,

Date de publication : 01-09-2018

5th International Conference on Protective Structures (ICPS5)

Experimental study of standard and enhanced PMMA under dynamic impact at high temperature using a high-performance furnace

M. Klosak et al.

Date de publication : 01-08-2018

World Polymer Congress (MACRO’2018)

Optimal simultaneous management of maintenance and production activities for a multiple-product manufacturing system under variable setup costs

L. Mifdal et al.,

Date de publication : 01-07-2018

The 4th International Conference of Project and Logistic – PROLOG2018

The integrated production-inventory-routing problem in the context of reverse logistics: The case of collecting and remanufacturing of EOL products

Z. Chekoubi et al.,

Date de publication : 04-06-2018

2018 4th International Conference on Optimization and Applications (ICOA)

Lien : http://ieeexplore.ieee.org/abstract/document/8370563/

Morrocan Laboratory with High-Performance Tools for Perforation Tests at elevated Temperatures

M. Klosak

Date de publication : 01-06-2018

NATO Advanced Training Course, SPS Reference G5439

Lien : http://ebooks.iospress.nl/volumearticle/51445

Effet de la porosité sur les propriétés mécaniques et la taille du VER pour un matériau poreux

Han. El Minor et al.,

Date de publication : 03-05-2018

Xème Journées d’Etudes Techniques (JET’2018)

Caractérisation mécanique d’un biocomposite PP/CNA – Homogénéisation numérique et expérimentale

H. Akhzouz et al.,

Date de publication : 03-05-2018

Xème Journées d’Etudes Techniques (JET’2018)

Lien : http://jet2018.sciencesconf.org/program

On the Impact of Surface Discontinuity and Hill-effect on Dispersion of PM Emissions: Case of the Industrial Area of Anza

H. Gourgue et al.,

Date de publication : 01-05-2018

ICMES2018: 2nd International Conference on Materials and Environmental Science

Anodic Destruction of Pyrrole and Pyrimidine Solution Using a Boron-Doped Diamond Anode, SnO2, and DSA

M. Errami et al.,

Date de publication : 01-05-2018

ICMES2018: 2nd International Conference on Materials and Environmental Science

Design and implementation of intelligent MPPT control of the maximum power of PV modules

S. Moslim et al.,

Date de publication : 01-05-2018

ICMES2018: 2nd International Conference on Materials and Environmental Science

Experimental study of material properties at high impact perforation at elevated temperatures

M. Klosak

Date de publication : 01-05-2018

Colloque à la Faculté de génie mécanique, Université technique UTeM

Thermodynamic assessment of the pd-tb binary system

S. Kardellass et al.,

Date de publication : 01-05-2018

5ème Congrès International de Thermique (AMT’2018)

Lien : http://www.researchgate.net/publication/274618674_Thermodynamic_assessment_of_the_Pd-Y_binary_system

A New Method to Estimate the Instantaneous CO Emissions From Road Transport

H. Gourgue et al.,

Date de publication : 01-12-2017

Euro-Mediterranean Conference for Environmental Integration (EMCEI 2017)

Thermodynamic description of the Palladium-Ytterbium binary system

S. Kardellass et al.,

Date de publication : 01-11-2017

3rd International Conference on Chemical Engineering

Lien : http://www.researchgate.net/publication/321808722_Thermodynamic_Description_Of_The_Palladium-Ytterbium_Binary_System

Integrated maintenance/production planning plan for a multiple-product manufacturing system with variable maintenance and changeover costs considerations

L. Mifdal et al.,

Date de publication : 01-11-2017

The Xth International Conference on Industrial Engineering and Systems Management

Lien : http://hal.archives-ouvertes.fr/hal-03157993/document

Experimental and numerical study of brass through perforation tests at elevated temperatures

M. Klosak et al.,

Date de publication : 01-09-2017

11th Workshop Dynamic Behaviour of Materials and its Applications in Industrial Processes

Analysis of aluminum alloy behavior during perforation process while heated using a thermal chamber

A. Bendarma et al.,

Date de publication : 01-06-2017

ICCEMS - IOP 2017: 2nd International Conference on Civil Engineering and Materials Science

Optimisation du réseau de la chaîne de distribution avec multi-dépôts et multiproduits : cas de la distribution dans le secteur pharmaceutique au Maroc

O. Elachmit et al.,

Date de publication : 01-06-2017

1ère édition de la Conférence internationale sur la logistique et le transport vert

L’analyse expérimentale et numérique de l’alliage d’aluminium AA 3003 soumis à des tests de perforation dynamique sous l’influence de la forme d’un projectile conique

A. Bendarma et al.,

Date de publication : 01-06-2017

The 9th International Congress of Applied Mechanics

Perforation of brass plate specimens at elevated temperatures – experimental study and numerical simulation

M. Klosak et al.,

Date de publication : 07-05-2017

Colloque à l'Académie Polonaise des Sciences

Experimental Study of Brass Properties at High Impact Perforation Using a Thermal Chamber for Elevated Temperatures

M. Klosak et al.,

Date de publication : 01-05-2017

6th International Symposium on Solid Mechanics (MecSol’2017)

Experimental and numerical study of brass specimens subjected to high rates of loading during perforation tests and heated using high-performance thermal chamber

M. Klosak et al.,

Date de publication : 01-05-2017

2017 Joint International Conference on Materials Science and Engineering Application (ICMSEA 2017) and International Conference on Mechanics, Civil Engineering and Building Materials (MCEBM 2017)

Lien : http://www.researchgate.net/profile/Maciej-Klosak/publication/326790587_Experimental_and_Numerical_Study_of_Brass_Specimens_Subjected_to_High_Rates_of_Loading_During_Perforation_Tests_and_Heated_Using_High-Performance_Thermal_Chamber/links/5b86840a299bf1d5a72ef284/Experimental-and-Numerical-Study-of-Brass-Specimens-Subjected-to-High-Rates-of-Loading-During-Perforation-Tests-and-Heated-Using-High-Performance-Thermal-Chamber.pdf

Experimental and numerical study of aluminum alloy specimens subjected to high rates of loading during perforation tests and heated using high-performance thermal chamber

A. Bendarma et al.,

Date de publication : 01-05-2017

13ème Congrès de Mécanique (CMM’2017)

Lien : http://cmm2017.sciencesconf.org/129448/Amine_BENDARMA_CMM_2017.pdf

Plastic zone and effective distance under mixed mode fracture -Volumetric approach

E.M. Kibbou et al.,

Date de publication : 01-05-2017

13ème Congrès de Mécanique (CMM’2017)

Lien : http://www.academia.edu/download/47233493/I1302035763.pdf

Problem of maintenance strategy and production planning for a multiple-product manufacturing system

L. Mifdal et al.,

Date de publication : 01-05-2017

7th International Conference in Industrial Engineering and Operations Management (IOEM)

Lien : http://ieomsociety.org/ieom2017/papers/431.pdf

An Optimal Integrated Maintenance Strategy for a Multi-Machines System

L. Mifdal et al.,

Date de publication : 01-05-2017

7th International Conference in Industrial Engineering and Operations Management (IOEM)

Lien : http://ieomsociety.org/ieom2017/papers/122.pdf

Investigating the effect of sensible and latent heat storage materials on the performance of a single basin solar still during winter days

M. Asbik, et al.

Date de publication : 15-12-2021

Journal of Energy Storage

Lien : http://www.sciencedirect.com/science/article/abs/pii/S2352152X21011634

The Habermasian perspective of digital entrepreneurship: A roadmap for the evolution of the field

I. Majdouline, et al.

Date de publication : 13-12-2021

Recherches en Sciences de Gestion-Management Sciences-Ciencias de Gestión

Lien : http://www.cairn.info/revue-recherches-en-sciences-de-gestion-2021-4-page-73.htm

Effect of stacking sequence on the mechanical performance of a composite structure under slamming impact

S. El Garouge, et al.

Date de publication : 18-11-2021

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785321066086

Entreprendre et innover en formation : partage d’expériences pédagogiques

C. Shmitt, et al.

Date de publication : 18-11-2021

Ouvrage collectif / Editeur : PUN – Éditions universitaires de Lorraine

Lien : http://www.lcdpu.fr/livre/?GCOI=27000100988580

The improvement of the physical and mechanical properties of CNTs based composite material

S. El Garouge, et al.

Date de publication : 09-11-2021

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785321068255

Multi-scale physico-chemical characterization of CEB/ANS bio-composites

H. Akhzouz, et al.

Date de publication : 05-11-2021

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785321066396

The behaviour of aluminum alloy 1050 sheet subjected to impact and perforation process: Experimental and numerical approaches

A. Bendarma, et al.

Date de publication : 30-10-2021

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785321066372

Les labels nationaux certifiant la responsabilité sociale de l’entreprise favorisent-ils une gestion des ressources

F. Jebeli, et al.

Date de publication : 05-08-2021

Recherches en Sciences de Gestion

Lien : http://www.cairn.info/revue-recherches-en-sciences-de-gestion-2021-2-page-269.htm

Study of the effect of some deflector’s geometry factors on the reduction of the aerodynamic drag of the car model

M. Maine, et al.

Date de publication : 01-08-2021

Jordan Journal of Mechanical and Industrial Engineering

Lien : http://www.jjmie.hu.edu.jo/V15-3/03-jjmie_28_21.pdf

The Influence of Temperature in the Al 2024-T3 Aluminum Plates Subjected to Impact: Experimental and Numerical Approaches

M. Klosak, et al.

Date de publication : 30-07-2021

Materials

Lien : http://www.mdpi.com/1996-1944/14/15/4268

Entreprendre et innover en formation : partage d’expériences pédagogiques

E. Deschanet & I. Majdouline

Date de publication : 15-07-2021

Revue Projectique

Lien : http://www.cairn.info/revue-projectique-2021-2-page-5.htm

Perception de l’égalité de genre chez les étudiants en management: une analyse des supports visuels Powerpoint utilisés par les étudiants

F. Jebeli, et al.

Date de publication : 15-07-2021

Revue Projectique

Lien : http://www.cairn.info/revue-projectique-2021-2-page-61.htm

Perception de l’égalité de genre chez les étudiants en management : une analyse des supports visuels Powerpoint utilisés par les étudiants

I. Majdouline

Date de publication : 15-07-2021

Chapitre d'ouvrage: Entreprendre pour innover dans la formation / Revue Projectique

Lien : http://www.cairn.info/revue-projectique-2021-2-page-61.htm

Simple shear behavior and constitutive modeling of 304 stainless steel over a wide range of strain rates and temperatures

B. Jia, et al.,

Date de publication : 23-04-2021

International Journal of Impact Engineering

Lien : http://www.sciencedirect.com/science/article/abs/pii/S0734743X2100083X

Integrated production-maintenance strategy considering quality constraints in dry machining

I. Majdouline, et al.

Date de publication : 13-04-2021

International Journal of Production Research

Lien : http://www.tandfonline.com/doi/abs/10.1080/00207543.2021.1905193

Dynamic behavior and failure of aluminum-polyethylene sandwich structure

A. Bendarma

Date de publication : 01-04-2021

Ouvrage individuel / Editeur: Publishing House of Poznan University of Technology

Advanced Experimental and Numerical Analysis of Behavior Structural Materials Including Dynamic Conditions of Fracture for Needs of Designing Protective Structures

M. Graka, et al.

Date de publication : 03-03-2021

Chapitre d'ouvrage: Soft Target Protection: Theoretical Basis and Practical Measures

Lien : http://link.springer.com/chapter/10.1007/978-94-024-1755-5_10

Experimental analysis of the aluminum alloy sheet subjected to impact and perforation process

A. Bendarma, et al.

Date de publication : 01-01-2021

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785320339882

Mechanical Characterization Of Bio-Composite Ceb Stabilized With Argan Nut Shell And Cement

H. Akhzouz, et al.

Date de publication : 01-01-2021

Journal of Building Engineering

Lien : http://www.sciencedirect.com/science/article/pii/S2214785320341249

Perforation analysis of S235 steel sheets up to 573 K using experimental and numerical methods

Date de publication : 01-01-2021

Archives of Civil Engineering

Lien : http://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-a875ca5f-b2c0-47e5-a6af-ee67ba0425a4

Model of Fish Cannery Supply Chain Integrating Environmental Constraints (AHP and TOPSIS)

S. El Hidaoui, et al.

Date de publication : 01-01-2021

Advances in Science, Technology and Engineering Systems Journal

Lien : http://www.researchgate.net/profile/Sanael-El/publication/349110131_Model_of_Fish_Cannery_Supply_Chain_Integrating_Environmental_Constraints_AHP_and_TOPSIS/links/60210a5e92851c4ed557a5ba/Model-of-Fish-Cannery-Supply-Chain-Integrating-Environmental-Constraints-AHP-and-TOPSIS.pdf

Revisiting technological entrepreneurship research: An updated bibliometric analysis of the state of art

I. Majdouline, et al.

Date de publication : 01-01-2021

Technological Forecasting & Social Change

Mechanical Properties of Brass under Impact and Perforation Tests for a Wide Range of Temperatures: Experimental and Numerical Approach

M. Klosak, et al.

Date de publication : 21-12-2020

Materials

Lien : http://www.mdpi.com/1996-1944/13/24/5821

Le comportement entrepreneurial catalyseur de l’innovation logistique : Etude qualitative sur les prestataires logistiques au Maroc

I. Majdouline, et al.

Date de publication : 15-11-2020

Logistique & Management

Lien : http://www.tandfonline.com/doi/abs/10.1080/12507970.2020.1835568

Dynamic Behavior of Aluminum Alloy Aw 5005 Undergoing Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System at High Strain Rates and Temperatures

A. Bendarma, et al.

Date de publication : 16-10-2020

Materials

Lien : http://www.mdpi.com/1996-1944/13/20/4614

CYP2D6 gene polymorphisms and breast cancer risk in Moroccan population: A case-control study

E. Elouilamine, et al.

Date de publication : 01-09-2020

Gene Reports

Lien : http://www.sciencedirect.com/science/article/pii/S2452014420301825

Acute Respiratory Infections Epidemiology and Etiology in Hospitalized Moroccan Children under 15 Years

N. Ighid, et al.

Date de publication : 29-08-2020

Integrative Journal of Medical Sciences

Lien : http://mbmj.org/index.php/ijms/article/view/194

Energy Balance of Three-Phase High Voltage Power Supply for Microwave Generators

A. Belhaiba, et al.

Date de publication : 01-07-2020

Microwave review

Lien : http://www.mtt-serbia.org.rs/files/MWR/MwR-Vol26No1/Vol26No1-2133-1.pdf

Physical Characterization Of Bio-Composite Ceb Stabilized With Argan Nut Shell And Cement

H. Akhzouz, et al.

Date de publication : 01-06-2020

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785320341249

An Optimal Preventive Maintenance Policy for a Solar Photovoltaic System

A. Baklouti, et al.

Date de publication : 22-05-2020

Sustainability

Lien : http://www.mdpi.com/2071-1050/12/10/4266

Entrepreneurship orientation and innovation linkage: the case of Moroccan firms

I. Majdouline, et al.

Date de publication : 20-03-2020

Revue Projectique

Lien : http://www.cairn.info/revue-projectique-2020-1-page-27.htm

CYP2C19 gene polymorphisms among Moroccan patients with breast cancer disease: A case-control study

E. Elouilamine, et al.

Date de publication : 24-01-2020

Gene Reports

Lien : http://www.sciencedirect.com/science/article/pii/S2452014420300248

Material and structural behaviour of PMMA from low temperatures to over the glass transition: Quasi-static and dynamic loading

D. Garcia-Gonzalez, et al.

Date de publication : 01-01-2020

Polymer Testing

Lien : http://www.sciencedirect.com/science/article/abs/pii/S0142941819318811

Perforation tests of composite structure specimens at wide range of temperatures and strain rates – experimental analysis

A. Bendarma, et al.

Date de publication : 01-01-2020

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785319326203

Calphad-type assessment of the Pd-Yb binary system supported by first-principles calculations–Part II: Results

S. Kardellass, et al.

Date de publication : 01-01-2020

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785319331852

Calphad-type assessment of the Pd-Yb binary system supported by first-principles calculations–Part I: A review

S. Kardellass, et al.

Date de publication : 01-01-2020

Materials Today : Proceedings

Lien : http://www.sciencedirect.com/science/article/pii/S2214785319326240

A platform architecture for occupancy detection using stream processing and machine learning approaches

H. El Khoukhi, et al.

Date de publication : 23-12-2019

Concurrency and Computation: Practice and Experience Journal

Lien : http://onlinelibrary.wiley.com/doi/abs/10.1002/cpe.5651

Perforation Behavior of 304 Stainless Steel Plates at Various Temperatures

A. Jia, et al.,

Date de publication : 10-07-2019

Journal of Dynamic Behavior of Materials

Lien : http://link.springer.com/article/10.1007/s40870-019-00208-9

Prediction of Surface Quality Based on the Non-Linear Vibrations in Orthogonal Cutting Process: Time Domain Modeling

E.M., Kibbou, et al.

Date de publication : 26-06-2019

Journal of Manufacturing and Materials Processing

Lien : http://www.mdpi.com/2504-4494/3/3/53/htm

Moroccan Laboratory with High-Performance Tools for Perforation Tests at Elevated Temperatures

M. Klosak, et al.

Date de publication : 10-05-2019

Chapitre d'ouvrage: Critical Infrastructure Protection: Best Practices and Innovative Methods of Protection

Lien : http://ebooks.iospress.nl/volume/critical-infrastructure-protection-best-practices-and-innovative-methods-of-protection

Electrochemical removal of methylene bleu dye in aqueous solution using Ti/RuO2–IrO2 and SnO2 electrodes

A. Baddouh, et al.

Date de publication : 29-04-2019

Separation Science and Technology

Lien : http://www.tandfonline.com/doi/abs/10.1080/01496395.2019.1608244

Strain rate effect on the mechanical behavior of polyamide composites under compression loading

Date de publication : 15-04-2019

Composite Structures

Lien : http://www.sciencedirect.com/science/article/abs/pii/S026382231834529X

A context-driven platform using Internet of things and data stream processing for heating, ventilation and air conditioning systems control

F. Lachhab, et al.

Date de publication : 09-04-2019

Journal of Systems and Control Engineering

Lien : http://journals.sagepub.com/doi/abs/10.1177/0959651819841534

Enhanced electrochemical degradation of a basic dye with Ti/Ru 0.3 Ti 0.7 O 2 anode using flow-cell

A. Baddouh, et al.

Date de publication : 18-03-2019

Desalination and Water Treatment

Lien : http://www.cabdirect.org/cabdirect/abstract/20193185096

Perforation Tests of Aluminum Alloy Specimens for a Wide Range of Temperatures Using High-Performance Thermal Chamber – Experimental and Numerical Analysis

A. Bendarma, et al.

Date de publication : 01-01-2019

IOP Conference Series: Materials Science and Engineering

Lien : http://iopscience.iop.org/article/10.1088/1757-899X/491/1/012027/pdf

Toward Primary Congenital Glaucoma GLC3B Gene Identification: The Case of Kazrin Gene

S. El Akil, et al.

Date de publication : 01-01-2019

International Journal of Science and Research

Lien : http:// www.researchgate.net/publication/330325723_Toward_Primary_Congenital_Glaucoma_GLC3B_Gene_Identification_The_Case_of_Kazrin_Gene

Anodic oxidation of methylene blue dye from aqueous solution using SnO2

A. Baddouh, et al.

Date de publication : 01-01-2019

Iranian journal of chemistry and chemical Engineering

Lien : http://www.sid.ir/FileServer/JE/84320190517

A new method to estimate the instantaneous nox emissions from road traffic

H. Gourgue, et al.

Date de publication : 01-01-2019

Chapitre d'ouvrage: Handbook of Environmental Materials Management

Lien : http://link.springer.com/referenceworkentry/10.1007/978-3-319-73645-7_52

Dynamic perforation and compression tests of PMMA for a wide range of temperatures-Experimental and preliminary numerical analysis

M. Klosak, et al.

Date de publication : 07-09-2018

EPJ Web of Conference

Lien : http://www.epj-conferences.org/articles/epjconf/abs/2018/18/epjconf_dymat2018_02055/epjconf_dymat2018_02055.html

Experimental Study and Modelling of Poly (Methyl Methacrylate) and Polycarbonate Compressive Behavior from Low to High Strain Rates

Z. El Qoubaa, et al.

Date de publication : 05-03-2018

Journal of Dynamic Behavior of Materials

Lien : http://link.springer.com/article/10.1007/s40870-018-0147-5

Editorial du N°17 de la revue Projectique, De Boeck Supérieur

I. Majdouline

Date de publication : 27-02-2018

Chapitre d'ouvrage: Revue Projectique

Lien : http://www.cairn.info/revue-projectique-2017-2-page-5.htm

Protocol to define material behaviour and failure strain level at low and high strain rates based on compression test

A. Bendarma, et al.

Date de publication : 08-02-2018

Journal of Theoretical and applied mechanics

Lien : http://hal.univ-lorraine.fr/hal-03248640/document

Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures

M. Klosak, et al.

Date de publication : 05-02-2018

Latin American Journal of Solids and Structures

Lien : http://www.scielo.br/j/lajss/a/LXhypyy8SqWqxySWX6PZktG/?lang=en

New device to capture the temperature effect under dynamic compression and impact perforation of polymers, application to pmma

A. Rusinek, et al.

Date de publication : 01-02-2018

Polymer Testing

Lien : http://www.sciencedirect.com/science/article/abs/pii/S0142941817310917

Evolution of Tenacity in Mixed Mode Fracture – Volumetric Approach

O. Zebri, et al.

Date de publication : 01-01-2018

Mechanics and Mechanical Engineering

Lien : http://www.kdm.p.lodz.pl/articles/2018/4/[23540192%20-%20Mechanics%20and%20Mechanical%20Engineering]%20

A new method to estimate the instantaneous pollutants emissions from line sources

H. Gourgue, et al.

Date de publication : 01-01-2018

Chapitre d'ouvrage: Recent Advances in Environmental Science from the Euro-Mediterranean and Surrounding Regions

Lien : http://link.springer.com/chapter/10.1007/978-3-319-70548-4_33

Efficient removal of fungicide “Imazalil” from water by electrochemical processes

S. Brahim, et al.

Date de publication : 01-10-2017

Applied Journal of Environmental Engineering Science

Lien : http://revues.imist.ma/index.php/AJEES/article/view/9946

Knowledge, Attitude and Practice towards Collection and Disposal of Medical Waste among Medical Waste Workers in Khartoum State Hospitals, Sudan (2013 – 2016)

E. Eltayeb, et al.

Date de publication : 01-10-2017

Applied Journal of Environmental Engineering Science

Lien : http://revues.imist.ma/index.php/AJEES/article/view/9718/5657

Electrochemical degradation of Thiabendazole fungicide by anodic oxidation on the tin oxide electrode (SnO2)

A. Baddouh, et al.

Date de publication : 01-10-2017

Applied Journal of Environmental Engineering Science

Lien : http://revues.imist.ma/index.php/AJEES/article/view/9240

The appearance of lactase persistence: Between a selective genetic mutation and food and environmental adaptation

A. Bour, et al.

Date de publication : 01-05-2017

International Journal of Food Science and Nutrition

Lien : http://www.foodsciencejournal.com/download/154/2-3-29-482.pdf

Study of adult type primary Hypolactasis in Kenitra – Morocco in 2016

A. Bour, et al.

Date de publication : 06-02-2017

American Journal of Innovative Research and Applied Sciences

Lien : http://american-jiras.com/Zineb%20ManuscriptRef.1-ajiras270117.pdf

Perforation Analysis of the Aluminum Alloy Sheets Subjected to High Rate of Loading and Heated Using Thermal Chamber: Experimental and Numerical Approach

A. Bendarma, et al.

Date de publication : 01-01-2017

International Journal of Materials and Metallurgical Engineering

Lien : http://core.ac.uk/download/pdf/144730508.pdf

Experimental and numerical analysis of aluminium alloy AW5005 behavior subjected to tension and perforation under

A. Bendarma, et al.

Date de publication : 01-01-2017

Journal of Theoretical and applied mechanics

Lien : http://warminski.pollub.plwww.ptmts.org.pl/jtam/index.php/jtam/article/viewFile/3938/2696

Devenir des pesticides dans l’Air, l’Eau, Fruits et Légumes au Maroc

Date de publication : 01-02-2016

Edition UNIVERSITAIRE EUROPÉENNE

Modélisation d’un problème de transport combiné au problème de bin-packing : Etude de cas d’une entreprise Marocaine.

L. Mifdal et al.

Date de publication : 01-12-2015

10ème édition de la Conférence Internationale CPI 2015 Tanger, Maroc.

Développement d’une politique de maintenance d’un dispositif médical dont la dégradation est influencée par l’utilisation.

E. GUENDOULI et al.

Date de publication : 01-12-2015

10ème édition de la Conférence Internationale CPI 2015, Tanger, Maroc.

Lien : http://goo.gl/qZ22FO

Les situations entrepreneuriales : Définition et intérêts pour la recherche en entrepreneuriat,

I. MAJDOULINE et al.

Date de publication : 01-05-2015

9eme Congrès de l’Académie de l’Entrepreneuriat et de l’Innovation, Nantes, France.

Lien : http://preprod.v.e-polytechnique.ma/download/Les-situations-entrepreneuriales-D%C3%A9finition-et-int%C3%A9r%C3%AAts-pour-la-recherche-en-entrepreneuriat.pdf

Numerical study of the stress triaxialitydistribution: the case of aluminum and steel,

A. Bendarma et al.

Date de publication : 01-04-2015

12eme congrès de Mécanique, Casablanca, Maroc.

Lien : http://preprod.v.e-polytechnique.ma/download/Numerical-study-of-the-stress-triaxialitydistribution-the-case-of-aluminum-and-steel.pdf

Production/Maintenance Control of Multiple-Product Manufacturing System,

L. Mifdal et al.

Date de publication : 01-11-2014

The 2nd World Conference on Complex Systems, IEEE'14, Agadir, Morocco.

Lien : http://preprod.v.e-polytechnique.ma/download/ProductionMaintenance-Control-of-Multiple-Product-Manufacturing-System_opt.pdf

L’entrepreneur Marocain: Profil et compétences,

C. LOUE et I. MAJDOULINE

Date de publication : 01-10-2014

12ème Congrès International Francophone en Entrepreneuriat et PME, Agadir, Maroc

Lien : http://preprod.v.e-polytechnique.ma/download/L%E2%80%99entrepreneur-Marocain-Profil-et-comp%C3%A9tences.pdf

Les approches publicitaires dans la PME marocaine: le cas des produits de l’innovation,

H. ELBARDAI et I. MAJDOULINE

Date de publication : 01-10-2014

12ème Congrès International Francophone en Entrepreneuriat et PME, Agadir, Maroc.

Lien : http://preprod.v.e-polytechnique.ma/download/Les-approches-publicitaires-dans-la-PME-marocaine-le-cas-des-produits-de-l%E2%80%99innovation.pdf

Joint optimization approach of maintenance planning and production Scheduling for a multiple-product manufacturing system,

L. Mifdal et al.

Date de publication : 01-08-2014

The 19th World Congress on Promoting automatic control for the benefit of humankind, IFAC'14, Cape Town, South Africa.

Lien : http://preprod.v.e-polytechnique.ma/download/Joint-optimization-approach-of-maintenance-and-production-planning-for-a-multiple-product-manufacturing-system1.pdf

Outils d’aide à la décision basé sur la simulation dans le cadre du traitement des AVC,

I. MAJDOULINE et al.

Date de publication : 01-04-2014

Conférence RAMAQS’14, Rabat, Maroc.

Lien : http://preprod.v.e-polytechnique.ma/download/Outils-d%E2%80%99aide-%C3%A0-la-d%C3%A9cision-bas%C3%A9-sur-la-simulation-dans-le-cadre-du-traitement-des-AVC.pdf

An optimal maintenance/production planning for a multiple-product, single machine production system under failure rate.

L. Mifdal et al.

Date de publication : 01-06-2013

The 7th Conference on manufacturing, modelling, management and control, IFAC MIM'2013, Saint Petersburg, Russia

Lien : http://preprod.v.e-polytechnique.ma/download/An-optimal-maintenanceproduction-planning-for-a-multiple-product-single-machine-production-system-under-failure-rate.pdf

La nécessité d’aider les entrepreneurs à concevoir leur vision : proposition d’une méthode

I. MAJDOULINE et al.

Date de publication : 03-05-2013

Troyes, France mai-13

Lien : http://preprod.v.e-polytechnique.ma/download/La-n%C3%A9cessit%C3%A9-d%E2%80%99aider-les-entrepreneurs-%C3%A0-concevoir-leur-vision-proposition-d%E2%80%99une-m%C3%A9thode.pdf

Développement et optimisation d’une stratégie de maintenance dépendante du plan de production pour un système à multi-produit,

L. Mifdal et al.

Date de publication : 03-04-2013

11ème Congrès de Mécanique, Agadir, Morocco

Lien : http://preprod.v.e-polytechnique.ma/download/D%C3%A9veloppement-et-optimisation-d%E2%80%99une-strat%C3%A9gie-de-maintenance-d%C3%A9pendante-du-plan-de-production-pour-un-syst%C3%A8me-%C3%A0-multi.pdf

An optimal maintenance/production planning for a manufacturing system under the machine availability and subcontracting constraint

L. Mifdal et al.

Date de publication : 01-06-2012

The 9th International Conference of Modeling, Optimization and Simulation - MOSIM’12 Bordeaux, France

Lien : http://preprod.v.e-polytechnique.ma/download/An-optimal-maintenanceproduction-planning-for-a-multiple-product-single-machine-production-system-under-failure-rate1.pdf

Optimisation d’une politique de maintenance dépendante du plan de production et tenant compte de la sous-traitance

L. Mifdal et al.

Date de publication : 01-05-2012

5ème Conférence Internationale du Réseau Carthagène d’Ingénierie Agadir, Maroc

LMI approach for exponential stabilization of continuous-time delayed Takagi-Sugeno systems

N. Daraoui et al.

Date de publication : 01-09-2011

18th IFAC World Congress, Milano, Italy

Lien : http://preprod.v.e-polytechnique.ma/download/LMI-approach-for-exponential-stabilization-of-continuous-time-delayed-Takagi-Sugeno-systems.pdf

ENTREPRENEURSHIP TRAINING IN TECHNOLOGIC UNIVERSITY BY MODELING

I. MAJDOULINE et al.

Date de publication : 01-03-2010

8th International Conference of Modeling and Simulation - MOSIM’10 Hammamet, Tunisia

Lien : http://preprod.v.e-polytechnique.ma/download/Mosim-Tunisie.pdf

Entreprendre et innover dans une économie de la connaissance

I. MAJDOULINE et al.

Date de publication : 01-11-2009

6ième congrès de l'Académie de l'Entrepreneuriat Nice, France

Lien : http://preprod.v.e-polytechnique.ma/download/Entreprendre-et-innover-dans-une-%C3%A9conomie-de-la-connaissance.pdf

Plastic zone and effective distance under mixed mode fracture -Volumetric approach

A.Benderma, et al.

Date de publication : 01-03-2016

Accepted : Journal of Mechanical and Civil Engineering (IOSR-JMCE)

Gold Nanoparticles : synthesis and Polymeric Encapsulation Using Double Emulsion Solvent Process

D.Kabbaj, et al.

Date de publication : 01-03-2016

Journal of Colloid Science and Biotechnology

Lien : http://preprod.v.e-polytechnique.ma/download/DOC310316-31032016.pdf

Submicron magnetic core conducting polypyrrole polymer shell : Preparation and characterization.

D.Kabbaj, et al.

Date de publication : 01-12-2015

Materials Science and Engineering C

Lien : http://preprod.v.e-polytechnique.ma/download/Ernandes-MCE-C-2016.pdf

GÉNÉRATEUR ÉLECTRIQUE ÉCOLOGIQUE

A.BAMHAMED

Date de publication : 01-02-2016

N° de publication : WO/2016/028133 WIPO PATENTSCOPE

Lien : http://patentscope.wipo.int/search/fr/detail.jsf?docId=WO16/028133

Regards croisés sur les pratiques logistiques au Maroc et en Europe 1er Edition

I. MAJDOULINE, et al.

Date de publication : 01-12-2015

Submicron Magnetic core conducting polypyrrole polymer shell: preparation and characterization

D.Kabbaj, et al.

Date de publication : 01-12-2015

Materials Science & Engineering C

Lien : http://preprod.v.e-polytechnique.ma/download/Materials-Science-and-Engineering-C.pdf

A comparative study of electrochemical oxidation of methidation organophosphorous pesticide on SnO2 and boron-doped diamond anodes

M. ERRAMI et al.

Date de publication : 01-10-2015

Chemistry Central Journal

Lien : http://preprod.v.e-polytechnique.ma/download/Central-Journal-Hachami-2015.pdf

Dispersion of the NOx emissions from chimneys around industrial area: case study of the company CIBEL II

H. Gourgue et al.

Date de publication : 02-07-2015

Materials today 2015

Efficacité du perydroxan contre deux champignons phytopathogènes Botrytis cinerea et Penicillium digitatum (Efficiency anti-fungal of perydroxan for Botrytis cinerea and Penicillium digitatum)

M. Errami et al.

Date de publication : 01-06-2015

Journal of material and environmental science

Lien : http://preprod.v.e-polytechnique.ma/download/233-JMES-1494-2015-Elbouchtaoui.pdf

Assessment of Unhealthy Diets and Unsafe Foods and its Risks to Human Consumers: Public Health Approaches to prevent Chronic Diseases and Food Poisoning among University of Gezira Students, Sudan (2010 -2013)

M. Errami et al.

Date de publication : 06-05-2015

Moroccan journal of chemistry 2015

Lien : http://preprod.v.e-polytechnique.ma/download/Abas.-Mor.J.-Chem.-2708-9708-1-PB.pdf

Les compétences de l’entrepreneur marocain: validation quantitative d’un référentiel

C. LOUE et I. MAJDOULINE

Date de publication : 09-05-2015

Revue internationale PME

Lien : http://preprod.v.e-polytechnique.ma/download/Les-comp%C3%A9tences-de-l%E2%80%99entrepreneur-marocain-validation-quantitative-d%E2%80%99un-r%C3%A9f%C3%A9rentiel.pdf

Elaboration of Nanoparticles Containing Indomethacin: ArganOil for Transdermal Local and Cosmetic Application

R. Eddabra et al.

Date de publication : 01-02-2015

Journal of Nanomaterials

Study of the air pollutants dispersion from several point sources using an improved Gaussian model

H. Gourgue et al.

Date de publication : 02-02-2015

Journal of material and environmental science

Lien : http://preprod.v.e-polytechnique.ma/download/Study-of-the-air-pollutants-dispersion-from-several-point-sources-using-an-improved-Gaussian-model.pdf

Joint optimization approach of maintenance and production planning for a multiple-product manufacturing system

L. Mifdal et al.

Date de publication : 01-12-2014

International journal of Mathematical Problems in Engineering

Lien : http://preprod.v.e-polytechnique.ma/download/Joint-optimization-approach-of-maintenance-and-production-planning-for-a-multiple-product-manufacturing-system.pdf

Biodegradable Polymer Based Nanoparticles: Dermal and Transdermal Drug Delivery

R. Eddabra et al.

Date de publication : 01-09-2014

Journal of Colloid Science and Biotechnology

Lien : http://preprod.v.e-polytechnique.ma/download/Biodegradable-Polymer-Based-Nanoparticles-Dermal-and-Transdermal-Drug-Delivery.pdf

Kinetic parameter determination of roasted and unroasted argan oil oxidation under Rancimat test conditions

I.Zaanoun, et al.

Date de publication : 01-03-2014

GRASAS Y ACEITES

Lien : http://preprod.v.e-polytechnique.ma/download/1498-1837-1-PB.pdf

Corrosion Behaviour of Tinplate in Synthetic Industrial Water

I.Zaanoun, et al.

Date de publication : 01-07-2013

International Journal of ELECTROCHEMICAL SCIENCE

Lien : http://preprod.v.e-polytechnique.ma/download/80607842.pdf

Elaboration of Argan Oil Nanocapsules ContainingNaproxen for Cosmetic and TransdermalLocal Application

I. Zaanoun et al.

Date de publication : 01-07-2012

Journal of Colloid Science and Biotechnology

Couplage du modéle mathematimatique EMISENS et d’un SIG pour calculer les émissions générées par le trafic routier dans la région du grand Casablanca

H. Gourgue et al

Date de publication : 23-05-2012

Colloque international des utilisateurs de SIG

Lien : http://preprod.v.e-polytechnique.ma/download/Couplage%20du%20mod%C3%A9le%20mathematimatique%20EMISENS.pdf

Argan Oil Nanoemulsions as New HydrophobicDrug-Loaded Delivery System forTransdermal Application

I. Zaanoun et al.

Date de publication : 01-10-2012

Journal of Biomedical Nanotechnology

Model predictive control during the primary drying stage of lyophilisatio

N. Daraoui et al.

Date de publication : 01-05-2010

Control Engineering Practice

Lien : http://preprod.v.e-polytechnique.ma/download/Model%20predictive%20control%20during%20the%20primary%20drying%20stage%20of%20lyophilisatio.pdf